CLEARANCE
SPECIALS
MERCHANDISE
STUDIO
PRO AUDIO

30CM GOOSENECK (CAPSULE REQ)

AKG PROFESSIONAL

Lectern
Houses of worship
Conferencing

- Rugged construction
- Highly reliable contacts for capsule modules
- Integrated LED ring status indicator
- Integrated switchable bass rolloff
- Mini XLR connector or unterminated cable ends

For permanent screw-on installation, AKG offers goosenecks in various lengths: GN 15: approx. 15 cm (6 in.); GN 30: approx. 30 cm (12 in.); GN 50: approx. 50 cm (20 in.). Except for the GN 30 OC with unterminated cable ends, all come with a DPA in-line XLR phantom power adapter with integrated 200 Hz bass rolloff and LED ON/OFF jumper. The DPA connects to any standard mixer input with 9 to 52 V power supply. The mini XLR connector will thread through any hole from 11 mm (0.44 in.) in diameter. This eliminates the need for large holes or awkward unsoldering and resoldering of the much larger phantom power adapter during installation.

See product images for mounting examples.


The external phantom power adapter of the GN series makes setting up the goosenecks much easier, since a small hole will suffice for threading through a mini XLR connector. Having disconnected the cable, the integrated bass cut can be set quite easily inside the phantom power adapter. The phantom power adapter will operate off any available phantom power supply from 9 to 52 V, powering both the condenser capsule and the LED ring.


Available versions:
GN15/GN30/GN50: with 3-pin male XLR connector
GN30OC: with stripped and tinned leads

Available capsule modules for GN15/GN30/GN50: CK31, CK32, CK33, CK47, CK80

Included Accessories:
- Phantom Power Adapter
- Screw set with rubber brush
This product is sold through specialist dealers only,
please phone 09 275 8710 or email info@jands.co.nz.


YOU MAY ALSO NEED
RELATED PRODUCTS
» Battery Operated Phantom Power Supply - (B18)
18-V battery power supply for phantom powering a single condenser microphone. We recommend using two 9-V alkaline batteries that will » more

» Lockable Gooseneck Shock Mount - (H600)
The AKG H 600 shock mount is designed for permanent installation of GN Series E and ES version gooseneck modules » more

» Mounting Disk For Gn 15/30/50 - (MF-DA)
Mounting flange for use with GN series » more

» Mini Tripod Microphone Stand - (ST1)
Folding mini-tripod (dia 26cm, h 8.5 cm) » more

» Low Profile Table Stand - (ST45)
Low profile stand with off-center mount, rubber shock mount feet (Dia. 11.5 cm) » more

» Screw-on Cardioid Capsule For Gn/hm - (CK31)
Theater, onstage miking Lectern Houses of worship Conferencing - Cardioid polar pattern - 125ø pickup angle - Screw-on Capsule Module - Highly efficient windscreen The » more

» Omni-directional Capsule For Gn/hm - (CK32)
Surveillance Recording - Omnidirectional polar pattern - 360ø pickup angle - Screw-on Capsule Module - Highly efficient windscreen Due to its high sensitivity » more

» Screw-on Hypercardioid Capsule For Gn/hm - (CK33)
Theater, onstage miking Lectern Houses of worship Conferencing - Hypercardioid polar pattern - 95ø pickup angle - Screw-on Capsule Module - Highly efficient windscreen Due » more

» Hypercardioid Screw-on Shotgun Capsule - (CK47)
Theater, onstage miking Lectern Houses of worship Conferencing - Hypercardioid polar pattern - 80ø pickup angle - Screw-on Capsule Module - Studio quality shotgun » more

» Hypercardioid Shotgun Capsule For Gn/hm - (CK80)
Conferencing Houses of worship Lectern Theater, onstage miking - Hypercardioid polar pattern - 80ø pickup angle - Screw-on Capsule Module - Shotgun capsule - » more

Stock Code
GN30
Pack/QtyEA
Warranty2
Download Brochure
Download Cutsheet
Download Installation Guide
PRINT PRODUCT SHEET