30CM GOOSENECK W/ XLR (CAPSULE REQ)
AKG PROFESSIONAL
| Lectern Houses of worship Conferencing - Rugged construction - Highly reliable contacts for capsule modules - Integrated LED ring status indicator - Integrated switchable bass rolloff - Integrated XLR connector All E-Series modules come with an integrated connector for quick setup and takedown. The goosenecks are available in various lengths. GN 15 E: 23.5 cm (9.2 in.); GN 30 E: 38 cm (15 in.); GN 50 E: 57.2 cm (22.3 in.). Of course the series also has an integrated 200 Hz bass rolloff filter and LED ON/OFF jumper. See product images for mounting examples. Optimum suppression of structure-borne noise An essential feature of the installation hardware described below is the attenuation of structureborne noise that prevents the transmission of unwanted noise (footfall etc.). The amount of attenuation is determined by the material mix of the rubber shock mount. Modular Series installation modules usea mixture that is extremely efficient at frequencies below 200 Hz (e.g., knocking noise). Unlike standard rubber mixturees that respond to vibrations very slowly, the special AKG rubber mixture absorbs vibrations practically immediately. This prevents successive shocks from adding up. This rubber mixture is used in the H 600 and H 500. Available capsule modules for GN15E/GN30E/GN50E: CK31, CK32, CK33, CK47, CK80 Included Accessories: - Phantom Power Adapter This product is sold through specialist dealers only, please phone 09 275 8710 or email info@jands.co.nz.  » Battery Operated Phantom Power Supply - (B18) 18-V battery power supply for phantom powering a single condenser microphone. We recommend using two 9-V alkaline batteries that will » more  » Gooseneck Shock Mount - (H500) The AKG H500 shock mount is designed for permanent installation of GN Series E and ES version goosenck modules from » more  » Lockable Gooseneck Shock Mount - (H600) The AKG H 600 shock mount is designed for permanent installation of GN Series E and ES version gooseneck modules » more  » Lockable Xlr Panel Mount - (PS3FLOCK) Classic lockable panel mount socket. The PS3FLock requires a 20 mm mounting hole. » more    » Low Profile Table Stand - (ST45) Low profile stand with off-center mount, rubber shock mount feet (Dia. 11.5 cm) » more  » Screw-on Cardioid Capsule For Gn/hm - (CK31) Theater, onstage miking Lectern Houses of worship Conferencing - Cardioid polar pattern - 125ø pickup angle - Screw-on Capsule Module - Highly efficient windscreen The » more  » Omni-directional Capsule For Gn/hm - (CK32) Surveillance Recording - Omnidirectional polar pattern - 360ø pickup angle - Screw-on Capsule Module - Highly efficient windscreen Due to its high sensitivity » more |
Download Brochure Download Cutsheet Download Installation Guide PRINT PRODUCT SHEET 
   |
