MYMIX 16CH ANALOG INPUT BOX

MYMIX

The IEX-16L is a 16-channel input expander for the myMix system. Equipped with two DB25 connectors, it allows the connection of up to 16 balanced line-level signals that can be fed from devices such as mixing consoles or external microphone pre-amps. An IEX-16L can be connected to a single myMix unit without the need for a switch.

The IEX-16L can be configured through myMix devices, including channel naming and stereo linking. IEX-16L inputs are available as named channels on every myMix on the network. Inputs that are not used are switched off, allowing for the combination of IEX-16L and local myMix inputs . If the total channel count is 16 (up to 8 pairs) or less a standard 100Mbs nonmanaged switch may be used. Each myMix can control a maximum of 16 channels; however, many more channels can be available on the network. If more than 16 channels exist on the network, users can select which 16 channels will be monitored on their specific unit. A network operating more than 16 audio channels requires a switch that has IGMP snooping capabilities.

- 16 balanced line level inputs on (2) DB25 connectors
- Adds 16 channels to myMix System in a 1U, 19-inch package
- Convenient signal feed from a mixing console or external microphone pre-amps
- Individual Gain Adjustment (0dB, +6dB, +12dB) per input channel
- Can be combined with other myMix input and output devices
- Configuration port for connection of one myMix
- Works with Fast Ethernet Switches
- Allows the use of multiple IEX-16L with unlimited audio channels on network*
- Ethernet AVB ready

*The total number of audio channels on the network is dependent upon the capacity of the switch. Input signals are streamed in pairs as multicast packets, so a switch handling 64 multicast pairs allows 128 individual channels on a myMix network.

**DEMO SYSTEM AVAILABLE FOR TRIAL - Call your rep or Carly (09)275 8710 to arrange a demo**

YOU MAY ALSO NEED